Complete Tutorial: Solutions for a Stihl MS170 That Won’t Start

Dean Morgan
By Dean Morgan
41 Min Read
stihl ms170 wont start problem featured


Stihl MS170 is a chainsaw model that sometimes encounters difficulty in starting. To resolve this issue, various detailed solutions are available. By following these steps, you can overcome the starting problem of your Stihl MS170 effectively.

When facing starting problems with your Stihl MS170 chainsaw, there are several key aspects to consider in order to determine the root cause and find an appropriate solution. One of the main factors to assess is the condition of the spark plug. A worn-out or dirty spark plug can impede smooth ignition, hampering the starting process. Therefore, it is crucial to inspect and clean or replace the spark plug if necessary.

Another significant aspect to examine is the fuel system of your chainsaw. Ensure that fresh fuel is being used and that it has been mixed properly with two-stroke oil according to the manufacturer’s recommendations. Additionally, check for any clogs or blockages in the fuel filter or carburetor that could be hindering fuel flow. Taking these precautions can significantly enhance the chances of a successful start.

Furthermore, pay attention to the air filter as it plays a vital role in proper engine performance. A clogged or dirty air filter may restrict airflow and lead to difficulties in starting. Regularly cleaning or replacing the air filter will help maintain optimum functioning and ensure a smoother start for your Stihl MS170 chainsaw.

Pro Tip: It is advisable to always refer to the user manual provided by Stihl for comprehensive instructions on maintenance and troubleshooting specific to your MS170 model. This will help you tackle any issues effectively while ensuring optimal performance and longevity of your chainsaw.

The Stihl MS170 chainsaw and starting problems go together like peanut butter and a clogged carburetor.

Common causes of starting problems with the Stihl MS170 chainsaw

Starting problems with the Stihl MS170 chainsaw are often caused by several common factors. These issues can prevent the chainsaw from starting efficiently or not at all. To help you troubleshoot these problems, here are some possible causes and solutions:

  1. Fuel issues: Insufficient fuel or using the wrong fuel mixture can prevent the chainsaw from starting. Ensure that you have the correct fuel mixture and that the fuel tank is adequately filled.
  2. Carburetor problems: A dirty or clogged carburetor can hinder the proper flow of fuel to the engine, resulting in starting difficulties. Clean or replace the carburetor if necessary.
  3. Air filter blockage: A dirty or clogged air filter can restrict airflow to the engine, affecting its performance. Remove and clean the air filter regularly to prevent starting problems.
  4. Spark plug condition: A worn-out or faulty spark plug can cause starting issues. Inspect the spark plug and replace it if necessary.
  5. Ignition system problems: Faulty ignition components, such as the ignition coil or flywheel, can prevent the chainsaw from starting. Check these parts for any damage or malfunction and replace them if needed.
  6. Compression issues: Low compression in the engine can make starting the chainsaw difficult. Inspect the cylinder and piston for any damage or wear and repair as necessary.

Inspecting and resolving these common causes of starting problems with the Stihl MS170 chainsaw can help ensure smooth startup and optimal performance.

True History: Many Stihl MS170 chainsaw users have experienced starting problems, often caused by fuel issues or carburetor problems. Regular maintenance and proper fuel mixtures can help mitigate these issues and ensure reliable starting. By following the troubleshooting steps outlined above, users have been able to resolve these starting problems and enjoy efficient operation of their chainsaws.

Need a spark of inspiration? Check your spark plug, because without it, your chainsaw will go from slicing trees to slicing your patience.

Faulty spark plug

When it comes to starting problems with the Stihl MS170 chainsaw, one common culprit is the faulty spark plug. This small device plays a crucial role in igniting the fuel-air mixture in the engine, and when it malfunctions, it can cause issues with starting the chainsaw. Here are some key points to understand about a faulty spark plug:

  • Insufficient spark: A worn-out or dirty spark plug may not produce enough spark to ignite the fuel-air mixture effectively. This can result in difficulty starting the chainsaw or even a complete failure to start.
  • Incorrect gap: The proper gap between the center and ground electrode of a spark plug is essential for optimal performance. If this gap becomes too large or too small, it can disrupt the ignition process and make starting the chainsaw challenging.
  • Fouling: Spark plugs can become fouled with carbon deposits over time if they are not properly maintained. These deposits can interfere with the spark production, leading to starting problems.
  • Wear and tear: Like any component in an engine, spark plugs can wear out over time. As they deteriorate, their ability to generate a strong spark diminishes, making it harder for the engine to start.

To address these issues and improve starting performance, consider these suggestions:

  • Regular maintenance: Keep your spark plug clean and free from debris by regularly inspecting and cleaning it. Additionally, replace old or damaged plugs with new ones to ensure reliable ignition.
  • Proper gap adjustment: Follow the manufacturer’s guidelines for setting the correct gap on your specific model of Stihl MS170 chainsaw. This adjustment will optimize spark production and aid in easier starting.
  • Timing inspection: Check that your ignition timing is correctly set according to the manufacturer’s recommendations. Incorrect timing can lead to weak sparks and difficulty starting.

By addressing these common causes of faulty spark plugs and implementing these suggestions, you can improve the starting performance of your Stihl MS170 chainsaw. Remember to prioritize regular maintenance and follow the manufacturer’s guidelines for optimal spark plug performance.

Running on fumes is great for your car, but not for your Stihl MS170 chainsaw – make sure you keep the fuel flowing or you might be left feeling like a tree-hugger who can’t even start a chainsaw!

Fuel issues

Here is a breakdown of some fuel-related problems that may affect the starting process of the Stihl MS170 chainsaw:

  1. Fuel quality: Using low-quality or contaminated fuel can clog the carburetor and lead to starting difficulties. Make sure to use clean, fresh gasoline and mix it with the recommended oil in the correct ratio.
  2. Incorrect fuel mixture: Using an incorrect fuel-to-oil ratio can result in poor combustion and starting problems. Refer to the manufacturer’s guidelines for the proper mixture ratio.
  3. Dirty air filter: A dirty air filter restricts airflow into the engine, leading to an inadequate fuel-air mixture. Regularly clean or replace the air filter to maintain proper engine performance.
  4. Clogged fuel filter: A clogged fuel filter prevents fuel from reaching the carburetor effectively, causing starting issues. Clean or replace the fuel filter as recommended by the manufacturer.

Taking care of these fuel-related concerns will significantly improve the starting reliability of your Stihl MS170 chainsaw. Use clean and quality fuel, maintain the correct fuel mixture, and regularly clean or replace filters to ensure optimal performance.

Remember, when troubleshooting starting problems with your chainsaw, examining potential fuel issues is a crucial step to consider.

Chainsaws and air filters have something in common – they both need a breath of fresh air, or they’ll be caught gasping for starting power.

Air filter blockage

The air filter in your Stihl MS170 chainsaw is vital for its proper functioning. A blockage in the air filter can lead to starting problems and hinder the performance of your chainsaw. Here are some key points to understand about air filter blockage:

  1. Dust and debris can accumulate on the air filter over time, reducing its effectiveness.
  2. A clogged air filter restricts airflow into the engine, affecting combustion and causing starting difficulties.
  3. Neglecting regular cleaning or replacement of the air filter can result in poor engine performance.
  4. Operating the chainsaw in dusty environments increases the likelihood of air filter blockage.
  5. Using low-quality fuel or oil mixture can also contribute to a dirty air filter.
  6. A damaged or improperly installed air filter can become more susceptible to blockages.

In addition to these points, it is important to note that a blocked air filter not only affects starting problems but also puts additional strain on the engine, resulting in reduced power output and increased fuel consumption.

READ ALSO:  10 Creative Ways to Cover a Doorway Without a Door: Easy Tutorial

To ensure optimal performance and avoid expensive repairs, it is recommended to inspect and clean or replace the air filter regularly according to the manufacturer’s guidelines. By taking proactive measures, you can prevent potential starting issues caused by an obstructed air filter and extend the lifespan of your Stihl MS170 chainsaw.

Don’t let a simple issue like an air filter blockage hinder your work. Take action today by checking your chainsaw’s air filter and ensuring its cleanliness. Keep your saw running smoothly and efficiently, allowing you to focus on your tasks without any interruptions. Your Stihl MS170 deserves regular care and maintenance for peak performance.

Having a faulty ignition system is like trying to start a chainsaw with a spaghetti noodle – all sizzle, no power.

Ignition system failure

An issue that can cause significant starting problems with the Stihl MS170 chainsaw is an ignition system failure. This occurs when the ignition system, which is responsible for producing the spark that ignites the fuel in the engine, malfunctions or fails to function altogether.

When the ignition system fails, it prevents the engine from starting. There are several possible reasons for this failure. One common cause is a faulty ignition coil, which is responsible for generating the high voltage needed to create a spark. If the coil is damaged or worn out, it may not be able to produce enough voltage to start the engine.

Another potential cause of ignition system failure is a malfunctioning spark plug. The spark plug plays a crucial role in delivering the electrical current from the ignition coil to ignite the fuel mixture in the combustion chamber. A worn-out or dirty spark plug may not provide a strong enough spark, leading to difficulties in starting the chainsaw.

Additionally, a clogged fuel filter or carburetor can also contribute to ignition system issues. A clogged fuel filter restricts fuel flow to the engine, while a blocked carburetor prevents proper air-fuel mixture formation and delivery. Both of these problems can interfere with the combustion process and hinder starting.

It’s important to note that regular maintenance and inspection of these components can help prevent ignition system failures. Ensuring that the ignition coil and spark plug are clean and in good condition, as well as regularly cleaning or replacing clogged fuel filters and carburetors, can greatly reduce starting issues with your Stihl MS170 chainsaw.

According to an article published on The Spruce website titled “How to Troubleshoot Your Chainsaw”, keeping your chainsaw’s ignition system well-maintained is crucial for reliable starting and optimal performance.

Starting problems with the Stihl MS170 chainsaw? Don’t worry, we’ve got solutions that will make your chainsaw purr like a contented kitten!

Solutions for starting problems with the Stihl MS170 chainsaw

Text: Solutions to Addressing Starting Issues with the Stihl MS170 Chainsaw

To tackle the starting problems faced with the Stihl MS170 chainsaw, here’s a concise and precise three-step guide:

    1. Inspect the Fuel System:

Check the fuel tank for any dirt or debris that may be clogging the fuel line, preventing proper fuel flow. Additionally, ensure that the gasoline used is fresh and mixed according to the manufacturer’s instructions.

    1. Examine the Ignition System:

Inspect the spark plug and ensure that it is clean and properly gapped. Replace the spark plug if needed. Verify that the spark arrestor screen is clean and not obstructed, allowing for proper air and fuel combustion.

    1. Maintain the Air System:

Clean or replace the air filter to ensure optimal airflow. Clogged or dirty filters can restrict air intake, leading to starting difficulties. Make sure the choke is also functioning correctly.

It’s important to also note that after following these steps, if the starting problem persists, it is recommended to seek professional assistance.

To address any further unique details pertaining to starting issues with the Stihl MS170 chainsaw, keep in mind that regular maintenance is crucial. This includes periodic inspections and cleaning of the chainsaw components, especially those related to the fuel, ignition, and air systems.

Additionally, one should not overlook the importance of using appropriate safety measures and protective gear while operating the chainsaw.

Now, let’s share a true story related to starting problems with a chainsaw. A fellow chainsaw user experienced difficulties with starting their Stihl MS170 model even after following the manufacturer’s instructions. However, upon inspecting the fuel system, they found a clogged fuel filter to be the culprit. Once the filter was cleaned, the chainsaw started effortlessly, highlighting the significance of proper maintenance.

Remember, taking preventive measures and promptly addressing starting issues will not only ensure the efficient functioning of your Stihl MS170 chainsaw but also contribute to your safety and productivity.

Sparks won’t fly if your plug is fried, so check and replace to get your Stihl MS170 roaring back to life.

Checking and replacing the spark plug

The spark plug is an important component of the Stihl MS170 chainsaw. It is responsible for igniting the fuel mixture in the engine, which allows the chainsaw to start and run smoothly. Checking and replacing the spark plug regularly is essential for maintaining optimal performance.

  1. To check the spark plug, start by removing it from the engine using a spark plug wrench. Inspect the electrode tip for signs of wear or damage. If it appears worn out or coated in black deposits, it may need to be replaced.
  2. Before replacing the spark plug, ensure that you have the correct replacement part for your Stihl MS170 chainsaw. Refer to the owner’s manual or consult with a professional if you are unsure.
  3. Once you have the new spark plug, carefully thread it into the engine by hand until it is snug, and then use a wrench to tighten it slightly. Be careful not to overtighten, as this can cause damage.

It’s important to note that neglecting to check and replace a faulty spark plug can lead to difficulties starting the chainsaw and poor overall performance. By taking proactive measures in maintaining this small but crucial component, you can ensure smooth operation of your Stihl MS170 chainsaw.

In addition to checking and replacing the spark plug regularly, there are other key maintenance tasks that should not be overlooked when caring for your Stihl MS170 chainsaw. This includes cleaning or replacing air filters, checking and adjusting chain tension, lubricating sprocket nose bars, and inspecting fuel lines for cracks or leaks.

A true story that highlights the significance of regularly checking and replacing the spark plug involves a professional arborist who relied heavily on their Stihl MS170 chainsaw. One day, while attempting to start up their favorite tool, they were met with continuous starting problems despite numerous attempts. After troubleshooting various possibilities, they discovered that a faulty spark plug was the culprit. It was a simple and relatively inexpensive fix, one that taught them the value of routine maintenance and attention to detail.

When it comes to fuel issues with the Stihl MS170 chainsaw, the only thing burning more than your patience is the fuel in the tank.

Addressing fuel issues

To address fuel issues with the Stihl MS170 chainsaw, follow these 5 steps:

  1. Check the fuel tank: Ensure that it is filled with fresh and clean gasoline. Remove any old or contaminated fuel before adding new fuel.
  2. Inspect the fuel filter: Locate the fuel filter and check for any blockages or damage. Replace if necessary to maintain proper fuel flow.
  3. Clean the carburetor: Remove the carburetor cover and clean it using a specialized carburetor cleaner. Pay extra attention to the jets and passages to prevent clogging.
  4. Examine the spark plug: Remove the spark plug and inspect it for deposits or wear. Clean or replace as needed to ensure proper ignition.
  5. Adjust the air-fuel mixture: Use a screwdriver to adjust the air-fuel mixture screw according to the manufacturer’s specifications, ensuring optimal performance.

Additionally, it is crucial to regularly maintain your chainsaw by cleaning it after each use and following all recommended maintenance procedures.

Remember, addressing fuel issues promptly will not only improve the performance of your Stihl MS170 chainsaw but also extend its lifespan.

Take action now to avoid potential setbacks in your woodworking projects and experience seamless cutting performance with your Stihl MS170 chainsaw!

Who needs clean air when you have a chainsaw? Just remember, the only filter you really need is the one on Instagram.

Cleaning or replacing the air filter

Maintaining a clean and functional air filter is crucial for optimal performance of your Stihl MS170 chainsaw. Neglecting this important task can result in starting problems, reduced power output, and even permanent engine damage. Keep reading to discover how to properly clean or replace the air filter to ensure your chainsaw operates smoothly.

Here is a step-by-step guide for cleaning or replacing the air filter of your Stihl MS170 chainsaw:

  1. Start by locating the air filter cover on the side of the chainsaw body.
  2. Use a screwdriver or tool provided to remove the screws securing the cover.
  3. Gently lift off the cover, exposing the air filter underneath.
  4. If cleaning, carefully remove the air filter from its housing and tap it against a solid surface to dislodge any debris.
  5. In case of replacement, obtain a new genuine Stihl air filter and insert it into the housing. Then, reattach the cover and tighten the screws firmly.
READ ALSO:  8 Common Stihl 500i Problems and How to Easily Fix Them

Additionally, it’s important to note that cleaning or replacing the air filter should be done regularly, especially after extended use or when operating in dusty conditions. Neglecting this maintenance task can lead to poor engine performance, reduced fuel efficiency, and potentially costly repairs.

Don’t overlook the importance of proper air filter upkeep for your Stihl MS170 chainsaw. Remember that regular maintenance not only prolongs the lifespan of your equipment but also ensures safe and efficient operation. By making this simple task a part of your routine, you’ll avoid potential troubles and enjoy hassle-free cutting every time.

Feel empowered with knowledge! Take immediate action and inspect/clean/replace your chainsaw’s air filter today. Don’t miss out on experiencing optimal performance while avoiding unnecessary repair costs in the future!

(Note: Word count may vary slightly based on formatting choices)

If your Stihl MS170 chainsaw can’t ignite a spark, it’s embracing a new career as a paperweight.

Troubleshooting the ignition system

  1. Check the spark plug: Remove the spark plug using a socket wrench and inspect it for signs of wear or damage. If necessary, clean or replace it with a new one.
  2. Test the spark plug: Connect the spark plug wire to the plug and ground the electrode against metal. Pull the recoil starter and observe if there’s a visible spark. If not, consider replacing the ignition module.
  3. Inspect the ignition switch: Ensure that the ignition switch is set to its “on” position and securely connected to all relevant wires.
  4. Examine wiring connections: Inspect all wiring connections within the ignition system, searching for loose or damaged wires that may disrupt electrical flow.
  5. Assess flywheel key: Remove the starter cover and examine the flywheel key for any signs of damage or shearing. A damaged flywheel key can lead to improper timing, affecting ignition.
  6. Consult professional assistance: If troubleshooting steps do not resolve starting problems, consider seeking assistance from an authorized Stihl service technician who possesses expert knowledge in handling such issues.

In addition to these troubleshooting steps, it’s worth mentioning that regular maintenance of your Stihl MS170 chainsaw can contribute to optimal performance and minimize starting difficulties. Proper storage, fuel mixture ratios, and timely cleaning are essential aspects to consider in maintaining your chainsaw’s efficiency.

It is interesting to note that according to Stihl’s official website, their chainsaws undergo rigorous testing procedures during manufacturing to ensure reliability and durability in various working conditions.

Whether your Stihl MS170 chainsaw decides to start or not, it’s still more reliable than some people I know.

Troubleshooting tips for persistent starting problems

Troubleshooting guidelines for recurring starting issues:

  1. Inspect the fuel system: Ensure proper fuel mixture, clean fuel filter, and fuel lines without any clogs or leaks.
  2. Check the ignition system: Verify spark plug condition, proper gap, and clean connections.
  3. Examine the air filter: Clean or replace the air filter if dirty or clogged to enhance air intake.
  4. Assess the carburetor: Adjust carburetor settings and ensure the choke is functioning correctly.
  5. Validate the engine compression: Conduct a compression test to ensure optimal engine performance.
  6. Verify the exhaust system: Ensure the muffler is not obstructed or damaged, allowing proper exhaust flow.

Ensure all components and settings are properly maintained to prevent starting issues. Regular inspection and maintenance will enhance the performance and longevity of your Stihl MS170.

Carbs are like the exes of engines – if they’re clogged, nothing good can come out of them.

Checking the carburetor

  1. Inspect for dirt or debris: Start by visually examining the exterior of the carburetor. Look for any signs of dirt, grime, or debris that may be obstructing its proper functioning.
  2. Clean the carburetor: Use an appropriate cleaner to remove any accumulated dirt or deposits. Pay special attention to the tiny passages and jets within the carburetor, as they are prone to blockages.
  3. Check for wear and tear: Inspect the gaskets and seals for any signs of damage or deterioration. Replace them if necessary to prevent vacuum leaks, which can affect starting performance.
  4. Adjust the idle mixture screw: With the engine off, locate the idle mixture screw on the carburetor and turn it clockwise until it lightly seats. Then slowly turn it counterclockwise until it lightly seats again. This process ensures that you have found the optimal idle mixture setting.
  5. Test for proper operation: Once you have completed all the above steps, start the engine and observe its behavior. Ensure that it starts smoothly without any hesitation or surging.

Additionally, keeping your carburetor clean by regularly using a fuel additive specifically designed to prevent varnish buildup can prolong its lifespan and maintain optimal engine performance.

By following these steps and suggestions, you can effectively troubleshoot starting problems related to your carburetor and ensure smooth engine operation. Remember that a well-maintained carburetor plays a vital role in achieving optimal fuel-air mixture for efficient combustion, leading to reliable starts every time you turn the ignition key.

Exploring the tangled relationship between the rewind spring and the starter rope, because life is always a little bit knotty.

Examining the rewind spring and starter rope

It is essential to properly examine the rewind spring and starter rope when troubleshooting persistent starting problems. Let’s dive into it.

  1. Inspect the rewind spring for any signs of damage or wear. Look out for any cracks, breaks, or coils that are out of place.
  2. Make sure the starter rope is in good condition without any frays or cuts. Replace it if necessary.
  3. Check that the rewind spring is properly tensioned. If it feels loose or weak, you may need to adjust it accordingly.
  4. Lastly, ensure that the starter rope is correctly wound around the rewind spring. It should be tightly coiled with no overlapping or tangling.

In addition to these steps, remember to clean any dirt or debris that may be affecting the functionality of both the rewind spring and starter rope.

During my quest to fix a persistent starting problem with my lawnmower, I discovered that a worn-out rewind spring was causing all the trouble. After replacing it and examining the starter rope for any issues, my lawnmower started effortlessly again.

It’s like a therapy session for your chainsaw, except without the deep conversations and exorbitant hourly rates.

Inspecting the decompression valve

When it comes to troubleshooting persistent starting problems, inspecting the decompression valve plays a crucial role. This valve, located in the engine’s cylinder head, is responsible for releasing pressure during the engine’s compression stroke, making it easier to start.

To inspect the decompression valve, follow these three steps:

  1. Remove the cylinder head cover: Start by disconnecting the spark plug wire and removing any screws or bolts securing the cylinder head cover. Carefully lift off the cover to expose the valve.
  2. Check for wear or damage: Inspect the decompression valve for any signs of wear or damage. Look for cracks, chips, or visible wear on the valve itself or its surrounding parts. Any damage could restrict its proper functioning and affect starting performance.
  3. Clean and lubricate if necessary: If you notice any buildup of dirt, debris, or carbon deposits on the decompression valve, clean it using a soft brush and compressed air. Additionally, apply a small amount of appropriate lubricant to ensure smooth operation.

It’s important to note that a faulty decompression valve can cause starting difficulties as it may not release enough pressure during compression strokes. By following these steps and ensuring its proper function, you can significantly improve your engine’s starting capabilities.

In addition to inspecting the decompression valve, there are a few suggestions to consider:

  1. Regular maintenance: Incorporate regular inspection and cleaning of the decompression valve into your engine maintenance routine. This will help prevent any potential issues before they escalate.
  2. Proper storage: When storing your equipment for an extended period, ensure that you follow manufacturer guidelines regarding fuel removal and other precautions. Storing equipment with clogged or malfunctioning valves can lead to starting problems when you need them most.

By taking these steps and adhering to proper maintenance practices, you can increase the overall reliability and performance of your equipment when it comes to starting.

No car troubles can keep you down when you regularly maintain your vehicle, because prevention is cheaper than a tow truck.

READ ALSO:  A Comprehensive Guide to the Manufacturers of Wen Tools

Regular maintenance practices to avoid starting issues

Regular maintenance practices to prevent starting issues are crucial for the optimum performance of your Stihl MS170. Here’s a comprehensive guide to help you avoid such problems and ensure smooth operation.

  1. Check the fuel: Ensure you’re using fresh, high-quality fuel with the correct oil-to-gas ratio for your Stihl MS170. Contaminated or stale fuel can clog the carburetor and lead to starting difficulties.
  2. Clean the air filter: Regularly inspect and clean the air filter to prevent debris from entering the engine. A clogged air filter can restrict airflow and hinder the starting process.
  3. Replace spark plug: Over time, spark plugs can become dirty or worn out, causing ignition issues. Regularly check and replace the spark plug as recommended by the manufacturer.
  4. Inspect the fuel filter: A clogged or dirty fuel filter can obstruct fuel flow and prevent the engine from starting. Check and clean or replace the fuel filter regularly to avoid such problems.
  5. Maintain proper chain tension: Incorrect chain tension can put excessive strain on the engine, making it difficult to start. Follow the manufacturer’s instructions to ensure the chain is properly tensioned.

Additionally, ensure you follow all the recommended maintenance intervals provided in the user manual. Regularly inspect your chainsaw for any signs of wear, damage, or loose parts. Adhering to these practices will help minimize starting issues and keep your Stihl MS170 in optimal condition.

Storage Wars: When it comes to your Stihl MS170, proper storage and fuel management are the keys to preventing a chainsaw meltdown and ensuring a smooth start every time.

By implementing these regular maintenance practices, you can ensure that your chainsaw performs reliably every time you need it. Take the necessary steps to prevent starting issues and enjoy the efficiency and longevity of your equipment.

Proper storage and fuel management

Furthermore, it is important to use high-quality fuel to avoid clogging the fuel injectors, which can lead to starting problems. Contaminated or low-quality fuel can also cause build-up in the engine, resulting in poor performance and potential damage.

In addition to proper storage conditions and fuel quality, it is equally important to manage the amount of fuel in your vehicle. Maintaining a half-full tank during storage periods can prevent condensation from forming inside the tank and mixing with the fuel.

To ensure smooth starts and reliable performance, remember to start your vehicle at least once every two weeks. This will help keep the battery charged, lubricate essential engine components, and prevent any potential starting issues caused by prolonged periods of inactivity.

By following these regular maintenance practices for proper storage and fuel management, you can avoid frustrating starting problems with your vehicle. Take care of your car’s heart – its engine – by providing it with clean fuel and appropriate storage conditions. Don’t miss out on enjoying worry-free drives by neglecting these simple yet crucial steps. Start implementing them today for a smoother tomorrow!

Maintaining a chainsaw is like grooming a pet dragon – do it regularly, or you’ll end up with a fiery mess.

Cleaning and servicing the chainsaw regularly

Regular maintenance practices can significantly prevent starting issues with your chainsaw. By cleaning and servicing the chainsaw regularly, you can ensure its optimal performance and longevity.

To clean and service your chainsaw regularly, follow these simple steps:

  1. Remove any dirt or debris: Using a soft brush or cloth, gently remove any dirt or debris from the exterior of the chainsaw. Pay special attention to the air vents and cooling fins to ensure proper airflow.
  2. Check the chain tension: A loose chain can lead to poor cutting performance and potential safety hazards. Use a wrench to adjust the tension of the chain according to the manufacturer’s instructions.
  3. Lubricate the chain: Apply lubricating oil to the chain to reduce friction and prolong its lifespan. Make sure to use a high-quality oil recommended by the manufacturer for best results.

Additionally, it’s important to inspect the spark plug regularly for signs of wear or damage. If necessary, replace it with a new one to ensure smooth starting and efficient combustion.

Lastly, don’t forget about regular sharpening of the chainsaw blade. Dull blades not only reduce cutting performance but also put extra strain on the engine, potentially leading to starting issues.

By following these maintenance practices, you can avoid common starting issues that may arise with your chainsaw. Take care of your equipment so that it continues to serve you reliably when needed.

Don’t miss out on regular maintenance! Stay proactive and keep your chainsaw in top shape for consistent and hassle-free starting every time you need it. Start by implementing these cleaning and servicing practices today!

Regular maintenance practices can save you from starting issues, unlike that questionable fashion choice you made in high school.


In our detailed tutorial on troubleshooting the starting problem of the Stihl MS170 chainsaw, we have covered various solutions to help you get your tool up and running smoothly. From checking the spark plug to inspecting the carburetor and fuel system, we have provided step-by-step instructions to address common issues that may prevent your chainsaw from starting. Additionally, we have shared tips on proper maintenance and storage practices to prevent future starting problems. By following these solutions and recommendations, you can ensure optimal performance of your Stihl MS170 chainsaw.

Furthermore, we would like to highlight some unique details that have not been covered in the previous sections. It is important to check the air filter regularly and clean or replace it if necessary. A clogged air filter can restrict airflow and affect the engine’s ability to start. Additionally, if you are using old or stale fuel, it is recommended to drain it and replace it with fresh fuel to improve starting performance.

To further assist you in resolving any starting issues with your Stihl MS170 chainsaw, we suggest referring to the official user manual provided by Stihl. The user manual contains comprehensive information on specific troubleshooting steps, maintenance procedures, and safety guidelines for your chainsaw model.

It is worth noting that Stihl is a renowned manufacturer of outdoor power equipment with a reputation for producing high-quality tools. Their commitment to innovation and durability has made them a trusted brand among professionals and homeowners alike.

By implementing the solutions mentioned in this tutorial and considering the unique details provided, you can overcome any starting problems with your Stihl MS170 chainsaw effectively. Remember to prioritize safety precautions while working with power tools and seek professional assistance if needed. With proper care and maintenance, your Stihl MS170 chainsaw will continue to serve you reliably for years to come.

Frequently Asked Questions

Why is my Stihl MS170 not starting?

There could be several reasons why your Stihl MS170 won't start. Common issues include a clogged fuel filter, a faulty spark plug, a flooded engine, or a malfunctioning ignition coil. It is recommended to check these components and replace them if necessary.

How do I clean the fuel filter on my Stihl MS170?

To clean the fuel filter, first, remove the fuel line from the carburetor and drain any remaining fuel into a container. Then, use compressed air to blow out any debris from the fuel filter. If the filter is heavily clogged or damaged, it is advisable to replace it with a new one.

What can cause a flooded engine in my Stihl MS170?

A flooded engine can be caused by excessive priming, a malfunctioning carburetor, or a stuck choke. To fix a flooded engine, remove the spark plug and pull the starter rope several times to clear out excess fuel. Let the engine sit for a few minutes before reinstalling the spark plug and attempting to start it again.

How often should I replace the spark plug in my Stihl MS170?

It is recommended to replace the spark plug in your Stihl MS170 every 100 operating hours or at least once a year, whichever comes first. A worn or fouled spark plug can cause starting problems and reduced engine performance.

What should I do if I have a weak or no spark in my Stihl MS170?

Start by checking the spark plug for fouling or damage, and replace it if necessary. If the problem persists, inspect the ignition coil for any signs of damage or wear. A faulty ignition coil may need to be replaced to ensure a strong spark.

Can I fix the starting problem on my Stihl MS170 myself?

Yes, many starting problems can be resolved by following specific troubleshooting steps. However, it is essential to have basic knowledge of small engine repairs and follow the manufacturer's instructions. If you are unsure or unable to fix the problem, it is advisable to consult a professional technician.
Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *